BULLPUP 12D ROCKET KIT
Product code: 7000Skill Level 2
The Bull Pup 12D is the sport scale version of the USAF AGM-12D Bull Pup and a great choice for your first scale model kit.
For all you sport scale enthusiasts, this one's for you! The Estes Bull Pup 12D is a highly detailed version of the USAF AGM-12D Bull Pup air to ground missile. First developed in the 1950s, the Bull Pup was used in combat until the 1970s. Over 30,000 Bull Pups were built and used until it was decommissioned in the mid 80s. If you're just getting started in scale model rockets, the Bull Pup 12D is a great kit to develop your scale model building skills.
This kit comes with a large diameter, single piece body tube, high quality molded plastic tail and nose cone, laser cut wood fins and authentic full color waterslide decals. Standing 15.6 inches tall, this rocket can pack a ballistic punch by reaching almost 675 feet on standard engines and recovering with a colorful 12 inch preassembled parachute.
Technical Specifications:
Length: 15.6 in. (39.6 cm)
Diameter: 1.33 in. (34 mm)
Estimated Weight: 1.8 oz. (51 g)
Laser cut Wood Fins, Waterslide Decals, 12 in. (30.5 cm) Parachute Recovery
Recommended Engines: A8-3 (First Launch), B4-4, B6-4, C6-5
Projected Max Altitude: 675 ft. (206 m)
Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, starters and recovery wadding are required - sold separately-unless otherwise specified.
Required for assembly:
White Glue, Plastic Cement, Finishing Supplies (Paint, Hobby Knife, Etc.)
Rocket Engines not Included.
WARNING: CHOKING HAZARD - SMALL PARTS! NOT INTENDED FOR CHILDREN UNDER 3.
The Bull Pup 12D is the sport scale version of the USAF AGM-12D Bull Pup and a great choice for your first scale model kit.
For all you sport scale enthusiasts, this one's for you! The Estes Bull Pup 12D is a highly detailed version of the USAF AGM-12D Bull Pup air to ground missile. First developed in the 1950s, the Bull Pup was used in combat until the 1970s. Over 30,000 Bull Pups were built and used until it was decommissioned in the mid 80s. If you're just getting started in scale model rockets, the Bull Pup 12D is a great kit to develop your scale model building skills.
This kit comes with a large diameter, single piece body tube, high quality molded plastic tail and nose cone, laser cut wood fins and authentic full color waterslide decals. Standing 15.6 inches tall, this rocket can pack a ballistic punch by reaching almost 675 feet on standard engines and recovering with a colorful 12 inch preassembled parachute.
Technical Specifications:
Length: 15.6 in. (39.6 cm)
Diameter: 1.33 in. (34 mm)
Estimated Weight: 1.8 oz. (51 g)
Laser cut Wood Fins, Waterslide Decals, 12 in. (30.5 cm) Parachute Recovery
Recommended Engines: A8-3 (First Launch), B4-4, B6-4, C6-5
Projected Max Altitude: 675 ft. (206 m)
Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, starters and recovery wadding are required - sold separately-unless otherwise specified.
Required for assembly:
White Glue, Plastic Cement, Finishing Supplies (Paint, Hobby Knife, Etc.)
Rocket Engines not Included.
WARNING: CHOKING HAZARD - SMALL PARTS! NOT INTENDED FOR CHILDREN UNDER 3.
Share:
Share on Facebook Share on Twitter Share on Pinterest Tell a friend